International Journal of Prosthodontics and Restorative Dentistry

Register      Login

VOLUME 5 , ISSUE 3 ( July-September, 2015 ) > List of Articles

RESEARCH ARTICLE

Composite Resin Stamping Technique using a Translucent Hot Melt Adhesive

Reda Mohiddin Dimashkieh

Citation Information : Dimashkieh RM. Composite Resin Stamping Technique using a Translucent Hot Melt Adhesive. Int J Prosthodont Restor Dent 2015; 5 (3):63-67.

DOI: 10.5005/jp-journals-10019-1132

Published Online: 01-09-2015

Copyright Statement:  Copyright © 2015; The Author(s).


Abstract

How to cite this article

Dimashkieh RM. Composite Resin Stamping Technique using a Translucent Hot Melt Adhesive. Int J Prosthodont Restor Dent 2015;5(3):63-67.


PDF Share
  1. A new proposal to optimize the occlusal margin in direct resin composite restorations of posterior teeth. European J Esthetic Dentis 2007;3(4):348-360.
  2. Hidden caries: What is it? Does it exist? Does it matter? Int Dent J 1997;47(5): 259-265.
  3. Hidden caries: a critical review. Scienti J Dentis 2015;2(1):33-36.
  4. Preoperative occlusal matrix aids the development of occlusal contour of posterior occlusal resin composite restorations-clinical rationale and technique. British dent J 2009;206(6):315-317.
  5. Occlusal index-assisted restitution of esthetic and functional anatomy in direct tooth-colored restorations. Quintessence Int 1996;27(2):81-88.
  6. Posterior resin composite restorations: a new technique. Quintessence Int 1996;27(11):733-738.
  7. Composite resin veneers: a new technique. Quintessence Int 1992;23(4):237-243.
  8. Restoration of posterior teeth using occlusal matrix technique. Indian J Dent Res 2010;21(4):596.
  9. (2015 AIW, The Free Encyclopedia. Retrieved 11:37, June 15, 2015. Available at: http://sen.wikipedia.org/w/index.php?title=Hot-melt_adhesive&oldid=654685719.
  10. The effect of finishing and polishing systems on surface roughness, microhardness and microleakage of a nanohybrid composite. J Int Dent Med Res 2012;5(3):155-160.
  11. Pulpal temperature increases with Er:YAG laser and high-speed handpieces. J Prosthet Dentis 2003;90(5):447-451.
  12. High-speed cavity preparation techniques with different water flows. J Prosthet Dentis 2002;87(2):158-161.
  13. Pulpal temperature increase with high- speed handpiece, Er:YAG laser and ultrasound tips. J Appl Oral Sci 2008;16(3):209-213.
  14. Temperature rise in cavities prepared by high and low torque handpieces and Er:YAG laser. British Dent J 2008;205(1):28-29.
  15. In vitro assessment of temperature change in the pulp chamber during cavity preparation. J Prosthet Dentis 2004;91(5):436-440.
  16. In vitro pulp chamber temperature rise from irradiation and exotherm of flowable composites. Int J Paediat Dentist 2009;19(1):48-54.
  17. Temperature change in pulp cavity in vitro during the polymerization of provisional resins. Dent Materials 2009;25(3):321-325.
  18. Effect of composite temperature on in vitro intrapulpal temperature rise. Dent Materials 2007;23(10):1283-1288.
  19. Comparison of the heat generation of light curing units. J Contempor Dent Pract 2008;9(2):65-72.
  20. Pulp chamber temperature rise during curing of resin-based composites with different light-curing units. Primary Dental Care 2008;15(1):33-38.
  21. Thermal variations in the pulp chamber associated with composite insertion techniques and light- curing methods. J Contempor Dent Pract 2009;10(1):17-24.
  22. Temperature analysis during bonding of brackets using LED or halogen light base units. Photomed Laser Therapy 2005;23(1):41-46.
  23. Temperature rise during orthodontic bonding with various light-curing units-an in vitro study. The Angle Orthodontist 2006;76(2): 330-334.
  24. In vitro study of the pulp chamber temperature rise during light-activated bleaching. J Appl Oral Sci 2008;16(5):355-359.
  25. Pulpal temperature rise during light-activated bleaching. J Bio Med Materials Res Part B: Applied Biomaterials 2005;72(2):254-259.
  26. A thermal investigation of dental bleaching in vitro. Photomed Laser Surg 2008;26(5):489-493.
  27. Temperature changes measured in vivo at the dentinoenamel junction and pulpodentin junction during cavity preparation in the Macaca fascicularis monkey. J Endodont 1988;14(7):336-339.
  28. Influence of various polishing methods on pulp temperature. J Orofac Orthoped/Fortschritte der Kieferorthopädie 2011;72(5):348-357.
  29. Effect of simulated pulpal microcirculation on intrapulpal temperature changes following application of heat on tooth surfaces. Int Endodon J 2009;42(3):247-252.
  30. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 1965;19(4):515-530.
  31. Clinical and histological evaluation of thermal injury thresholds in human teeth: a preliminary study. J Oral Rehabilitation 1997;24(11):791-801.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.