International Journal of Prosthodontics and Restorative Dentistry

Register      Login

VOLUME 3 , ISSUE 4 ( October-December, 2013 ) > List of Articles

RESEARCH ARTICLE

Effect of Air Abrasion on the Marginal Configuration of Titanium Crowns after Casting

Ramesh Nadiger, Bhupender Yadav, Puja Malhotra, Harish Yadav

Citation Information : Nadiger R, Yadav B, Malhotra P, Yadav H. Effect of Air Abrasion on the Marginal Configuration of Titanium Crowns after Casting. Int J Prosthodont Restor Dent 2013; 3 (4):131-135.

DOI: 10.5005/jp-journals-10019-1092

Published Online: 01-12-2013

Copyright Statement:  Copyright © 2013; The Author(s).


Abstract

How to cite this article

Yadav B, Malhotra P, Nadiger R, Yadav H. Effect of Air Abrasion on the Marginal Configuration of Titanium Crowns after Casting. Int J Prosthodont Restor Dent 2013;3(4):131-135.


PDF Share
  1. Effect of air abrasives on marginal configurations of porcelain fused to metal alloys: an SEM analysis. J Prosthet Dent 1991;65:38-43.
  2. Microabrasion of cast metal margins—awarning. J Prosthodont 2007;16:136-140.
  3. Adherence of a nickelchromium alloy and porcelain. J Prosthet Dent 1979;41: 167-172.
  4. Effect of varying surface texture on bond strength of one semiprecious and one nonprecious ceramoalloy. J Prosthet Dent 1979;42:86-95.
  5. New method for divesting cobaltchromium alloycastings: sandblasting with a mixed abrasive powder. J Prosthet Dent 2001;85:357-362.
  6. Effect of sandblasting and silica coating on dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater 1993;9:155-161.
  7. Titanium for prosthodontic applications: A review of literature. Quintessence Int 1996;27:401-408.
  8. Effect of surface contamination on adhesive bonding of cast pure titanium an Ti-6Al-4V alloy. J Prosthet Dent 1999;81:270-276.
  9. Effect of sandblasting and silica coating procedures on pure titanium. J Dent 1994;22:300-306.
  10. surface roughness and fatigue performance of commercially pure titanium and Ti-6Al-4Valloy after different polishing protocols. J Prosthet Dent 2005;93:378-385.
  11. Effect of different finishing and polishing agents on the surface roughness of cast pure titanium. J Prosthodont 2007;16:263-268.
  12. surface roughness and fatigue performance of commercially pure titanium and Ti-6Al-4 Valloy after different polishing protocols. J Prosthet Dent 2005;93:378-385.
  13. Effect of metal design on marginal distortion of metal ceramic crowns. J Dent Res 1984;63: 1327-1331.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.